STM Tuned
STM-Spec Evo X D2/Swift Drag Racing Coilovers
STM-Spec Evo X D2/Swift Drag Racing Coilovers
Regular price
$1,500.00 USD
Regular price
Sale price
$1,500.00 USD
Unit price
per
Couldn't load pickup availability
The STM-Spec D2/Swift Coilover setup is now available for your Evo X. Engineered with drag racing in mind, we've meticulously tailored and tested this suspension to deliver a formidable launch, while also providing excellent street manners with a firm, yet comfortable ride quality, versatile enough for mixed autocross applications. It's the complete package.
This is the exact same setup we use in multiple record-breaking VIII, IX & X Evos, including our 8.0 STM Evo RS!
Your coilovers will be shipped with the springs pre-installed, though final adjustments will be necessary upon installation. If you have any questions about the setup process, feel free to contact us for assistance.
Vehicle Fitment:
2008-2015 Mitsubishi Lancer Evolution X
Setup instructions:
1. Install coilovers at the desired ride height. No need to be perfect as it will change during the next few steps.
2. Once coilovers are installed and the car is back on the ground, jack the rear of the car up from the center (typically from the subframe is best).
3. While watching the suspension travel (spring compression), lower the car. As soon as the wheels are firm on the ground and the suspension starts to lower/travel, measure the distance of spring movement as you let the car the rest of the way down.
4. Using a Spring compressor, adjust the spring preload collar the same amount as the measured spring travel while letting the car down. (If the travel was 1", add 1" of preload to the spring collar) This will allow the shock to have maximum travel letting the suspension work through even the most aggressive launches.
5. Repeat these steps for the front.
6. Once the preload is determined and locked in, Adjust the ride height by spinning the body of the shock to the desired position/height.
7. You are now ready for an alignment.
Notes:
Pictured are the Evo 8 coilovers. New pics coming soon!
This is the exact same setup we use in multiple record-breaking VIII, IX & X Evos, including our 8.0 STM Evo RS!
Your coilovers will be shipped with the springs pre-installed, though final adjustments will be necessary upon installation. If you have any questions about the setup process, feel free to contact us for assistance.
Vehicle Fitment:
2008-2015 Mitsubishi Lancer Evolution X
Setup instructions:
1. Install coilovers at the desired ride height. No need to be perfect as it will change during the next few steps.
2. Once coilovers are installed and the car is back on the ground, jack the rear of the car up from the center (typically from the subframe is best).
3. While watching the suspension travel (spring compression), lower the car. As soon as the wheels are firm on the ground and the suspension starts to lower/travel, measure the distance of spring movement as you let the car the rest of the way down.
4. Using a Spring compressor, adjust the spring preload collar the same amount as the measured spring travel while letting the car down. (If the travel was 1", add 1" of preload to the spring collar) This will allow the shock to have maximum travel letting the suspension work through even the most aggressive launches.
5. Repeat these steps for the front.
6. Once the preload is determined and locked in, Adjust the ride height by spinning the body of the shock to the desired position/height.
7. You are now ready for an alignment.
Notes:
Pictured are the Evo 8 coilovers. New pics coming soon!
